Energy Management System SP 1000

Applications:

• Select IES File

  

• Features
• Specifications

Features:

• Achieves 95% efficiency rating, resulting in measurable, guaranteed energy savings.
• Dashboards allow users to check on kW, amps, temp, etc. in real time increments – and confirm the cost savings they are realizing
• Monitors and reports on energy usage and savings in real time
• Stores 1 year of data for auditing
• Minimum savings/month on electric bills
• ROI typically 12-24 months
• UL Approved
• Manufactured in MHT’s ISO 9001 certified factory
• Automatic capacitance switching
• Saves money on power consumption, avoids over-stressing equipment
• Software-driven, proactive real-time monitoring and reporting
• User-definable, detailed dashboard displays provide at-a-glance assessment of KW, Amps, KVAR, THD & PF
• Confirms lower energy usage to enable guaranteed savings
• Preemptive real-time, on-screen problem alerts on critical conditions
• Flexible, customizable configurations for every application
• From 208V to 480V systems
• Compatible with subpanels of any size
• Cleans power, suppresses surges and monitors electrical usage for any inductive application
• Reduces high demand kW on inductive motor loads (elevators, HVAC, escalators, machinery, etc.)
• Preemptive problem alerts on critical conditions
• CFOs saves operating expense
• Eligibility for utility rebates (e.g., Con Edison/Lockheed Martin in NYC Markets)
• Enhances property value through improved electrical efficiency
• Plant mangers gain efficiency, reduced production downtime
• Extends useful life of equipment, reducing cap ex & maintenance costs
• Helps architects, design engineers achieve LEED certification
• Brings electrical efficiency to 95% or greater
• Reduces demand charges by up to 60%  — proactively
• Limits harmonic distortion
• Custom tailored to guarantee savings for every customer

 

ROI Example

 

• Restaurant has $15,000/mo electric bill.  SP1000 units installed at $32,400. With guarantee of 12% savings, ROI is 18 months (savings of $1,800/mo @12%).

• Estimated savings example: Everyday at 9am, facility hits a peak demand of 100 kw (total 20x Mon.-Fri.).  Next highest demand was 48 kw (total 200x Mon-Fri.)

Savings Approach

Determine what is being done at 9am each workday.

Answer: A/C turned on.

Correction: Off peak time occurs before 6:59 am, so place a control on the 3 HVAC units for staged turn on: first starts at 6am, second at 6:20 and third at 6:40am.

SP1000A Data Sheet
Model	SP1000 Family –Series – 1000 – SP1000A Unit
Phase Configuration	(120/208 Wye- 3Ø) L1 (Blue), L2 (Red) L3 (Black) Neutral (White) Ground (Green)
Maximum Line	120/208 Volts
Total Capacitance rated up to	180μF per
Monitoring capabilities	Metering for monitoring PF, I, V, KVAR, and THD
KVAR performance range	.05 to 3.0 per phase
Frequency	50 – 60 Hertz
Typical Protection (See Note*)	Electrical Storms, Lightning Activity and Power Utility Spikes (Units are not intended to take the place of designed Power Surge Equipment)
Protected	10,000 AFC per UL-810
Lighting strike protection (See Note*)	Metal Oxide Varistors – with Transient Voltage Suppressors on separate MOV board for internal use only
Circuit Breaker Required	30A – 3 Ø Breaker or NEC approved isolation device (External to unit)
Low losses	1.2 watt per KVAR
Dissipation Factor	0.1% at 60 Hz and 25 C, 1% at 1,000 Hz and 25 C
Insulation Resistance	500 M Ohms per μF
Human Protection	Capacitor terminals isolated from human contact. All High voltage shielded from contact.
Operating temperature range	Capacitors -16° C to +70° C (Unit rating ambient temperature at 50° C)
Dimensions (LxHxD)	16” x 12” x 6” Metal Enclosure UL Listed
Operating Life	60,000 hours with >94% survival (Capacitors switched by electronics in separate bank configuration)
General Enclosure	UL Listed NEMA -1 Enclosure 16 Ga. H.R.P. & O. (1.4mm)
Wire Rating: 600 Volts	THHN – Gasoline & Oil Resistant 11
Wire Gauge	THHN – 10 Gauge wire
Unit Weight	30 lbs

 

Product Dimensions

Sample Photometrics

*** MHT Products are UL Listed/Labeled and Assembled in ISO9000/1 Certified US Facility
*** Every product is quality tested and inspected prior to shipment
*** MHT Lighting offers a 10-year, 60,000 hour Warranty (please see Warranty Terms and Conditions)
*** Made in the USA of US and Imported Parts, Meets Buy American requirements within the ARRA